I'm going to show you how to make a homemade dog collar bandanna.
1. First you lay out the fabric and lay the collar on the fabric and measure the collar to the fabric to make the collar pocket a little wider than the collar to make sure that you can fit the collar through.
2.Then you fold the pocket over and pin it. |
This is just a picture of my pin cushion that my Nana made me. |
3. The next thing you do is you measure with a square or a yard stick, we ended up having to use the square, and measure. We measured twelve inches because we have a large dog named Libby and she's a Great Pyrenees.
4. Here are the marks from measuring to help me cut.
5.In the picture above you also have to iron it then you unpin it and re-pin it to look like this and you sew it up
6.This is it what it should look something like when you have finished sewing for now.
This is just a close up of the collar pocket all sewn up.
7. Next you take some cupcake fabric and cut out a cupcake that has at least a little bit of the same color as the original fabric color. |
8.Then you hand sew both sides and the top but leave the bottom open and stuff with a cotton ball or nail polish remover pads that are torn up. |
9.Then you sew up the bottom.
10.Next you measure and pin seam binding to both sides and you sew it up. |
This is me using my sewing machine.
And then your DONE!!!
This is a close up of the cupcake. |
And this is it on our dog Libby (back) |
and this is another picture (front) |
You have done a great job with directions on making all of your projects. Good for you and keep it up!
ReplyDelete